boron oxide的例句大全

Study on the Boron Oxide Carbothermal Reduction Synthesis of Boron Carbide

硼酐碳热法合成碳化硼的研究

In this study, aluminum powder was added into the aluminum oxide and boron oxide reactants as an additive in order to control the morphology of the final products.

本研究通过在氧化铝和氧化硼反应物中添加铝粉来控制最终产物的形貌。

The molten hydrolytic reaction between sodium chloride and boron oxide at high temperature was studied.

研究了高温熔融状态下水蒸气与氯化钠、硼酐的水解反应.

Study on boron oxide coated electrode

氧化硼作为电极涂层的研究

Experimental and Theoretical Studies of Grinding Process of Boron Oxide

氧化硼研磨的实验与理论研究

Transformation of boron oxide b_2o_3 under high pressure and high temperature

高温高压条件下三氧化二硼相变过程的研究

Effect of Boron Oxide on Iron Reduction in Magnesium Alloy

氧化硼除铁净化镁合金的研究

An industrial test report on E-glass fibres with low boron oxide content

低硼无碱玻璃纤维工业性试验报告

The high purity cyclohexane oxide was cyclohexane oxide from 80% cyclohexane oxide by the reation with boron trifluoride ethyl ether, hydramine to produce high boiling point material.

介绍了用80%的环氧环己烷分别与三氟化硼乙醚、羟胺进行反应，将环氧环己烷中的戊醇、酮、醛生成高沸点产物，再进行精馏，从而获得高纯环氧环己烷的方法。

Flux is a low melting point glass, is lead oxide and boron silicate glass.

助熔剂为矮熔不背玻璃, 多见的有氧化铅和硼硅酸盐解的玻璃.

Non-alkali cloth made form aluminum boron silicate glass contains less than 0.8 % of alkali metal oxide.

无碱布采用铝硼硅酸盐玻璃成份,其碱金属氧化物含量不大于0.8%.

The condition and method for determing zinc oxide and boron trioxide in zinc borate by direct complexing titration is introduced.

介绍了采用直接络合滴定法测定硼酸锌中氧化锌和三氧化二硼的条件和方法。

Methods for chemical analysis of aluminium oxide& The curcumin photometric method for the determination of boron trioxide content

GB/T6609.16-1986氧化铝化学分析方法姜黄素光度法测定三氧化二硼量

Non-alkali cloth made form aluminum boron silicate glass contains less than 0.8% of alkali metal oxide.

无碱布采用铝硼硅酸盐玻璃成份，其碱金属氧化物含量不大于0.8%。

Boron trichloride has been used in a new process for etching stannic oxide films ( non-isothermal plasma) which is capable of etching 1.5 micron lines with excellent resolution and high precision.

本文采用三氯化硼作反应试剂，研究一种新的蚀刻二氧化锡薄膜工艺.此工艺可以蚀刻1.5μm的线条，其分辨率好且精度高。